PRODUCT INFORMATION
ITEM: The "Ciener" Hi-Power Pistol .22LR Conversion Unit
CONTENTS: The unit consists of a new slide, .22 LR barrel,
return spring, recoil buffer and 14
round magazine in a fitted plastic case. It utilizes the OEM recoil
spring rod.
FITS: The unit fits all Hi-Power pistols whose dimensional
tolerances meet those of the "John Browning" design specifications including
FN, Ingles & most other quality manufacturers’ clones including the recent HP-SFS.
NOT TO BE USED ON ANY DOUBLE ACTION FIREARMS - DANGER
OPERATING PRINCIPLE: Direct blow back design, as are all other .22 firearms.
LAST ROUND HOLD OPEN FEATURE?: The unit magazine's manufacturing technique does not allow for the retention of this feature.
INSTALLATION: Field strip the firearm as for cleaning to include removal of the slide/barrel/return spring/guide rod upper assembly. Install the unit's recoil spring on the OEM recoil spring guide rod and install into the sub-caliber assemble, assemble this unit onto the OEM frame, re-insert the take down pin and insert the unit's magazine. Approximate conversion time is ten to twenty seconds.
FUNCTIONING: The unit functions FLAWLESSLY (guaranteed) on good quality High Velocity, Hyper Velocity and some Standard Velocity quality .22 LR ammunition. Bullet design of 40 grain non-hollow point is recommended.
ACCURACY:
Standard Model Units - Even though they are designed for pleasure shooting,
due to the very tight attention to precision manufacturing the non-target models
are providing mean shot groups of 1 to 1 1/2 inches at 50 feet.
Plus Model Unit - It has several specifications that provide additional performance
beyond the outstandingly good standard models' but exact results depend on the
individual shooter and firearm.
FRONT SIGHT:
Standard Model Units - The front sight is part of the slide. It is machined
from the solid stock as the slide is machined.
Plus Model Unit - The front sight is accentuated length wise and
serrated.
REAR SIGHT:
Standard Model Units - The rear sight is a drift adjustable type. The
dovetail slot in the slide is the same size as the standard 1911A1 slot so any
adjustable sights made for the 1911A1 will fit.
Plus Model Unit - The rear sight is a "Millett" Gold Cup target adjustable
type inlaid directly into the raised serrated flat top rail of the slide's top.
MAGAZINE: The magazine's capacity is 14 rounds. We have two patents on its design. It is designed for this unit and can not be used with any other kits that we know of.
PLASTIC STORAGE BOX: The custom fitted box allows for the storage of the original parts from the firearm it is installed on while the unit is in use.
DIS-ASSEMBLE FOR CLEANING (FIELD STRIPPING):
Slide/Barrel/Return Spring Top End - The barrel is installed into the slide
from the rear underside similar to the OEM pistol. It is retained by the recoil
spring/guide rod.
Magazine - The unit magazine fully dis-assembles in seconds. It features
patented tongue-in-groove back plate retained by the bottom plate which slide
off/out so the interior can be easily cleaned.
MATERIAL:
Slide - The slide is machined on Mazak CNC equipment out of solid bar 7075
T6 Alloy. This is the same alloy used in the construction of the M16 U.S. Battle
Rifle, Colt Cmndr Light Weight, Beretta 92FS, F16 Fighting Falcon, NASA Space
Shuttles, etc.
Barrel - The barrel is machined from E. R. Shaw "match grade" pre-rifled
4140 barrel stock.
FINISH:
Alloy Parts - The unit's alloy parts are Mil-Spec anodized. The unit and
magazine are offered in Gloss Black, Matte Black, or Silver at no additional
charge (specify choice).
Steel Parts - The steel parts are Mil-Spec Parkerized as needed.
WEIGHT: The unit weighs approximately 1 lb. without the plastic box, 1.25 lb. in its box.
MANUFACTURER: Virtually all of the parts of the units are manufactured in our facility in Cape Canaveral, Florida. The units are assembled, tested, and shipped daily. Truly "Made in the U.S.A." with quality and pride.
GUARANTEE/WARRANTY: The unit is warranted for one year against defects in materials or workmanship. [ Warranty ]
MODIFICATIONS: We do not authorize any modifications of the unit. Additionally, any modification voids all warranties expressed or implied.
AVAILABILITY: Normally a stock item, assembled and tested daily.
Variations of the basic Hi-Power design that the conversion is NOT to fit:
FNP-9
FN HP-DA
[ Why you need this Conversion ]
[ Order Form ]